RVC Drop Through Rotary Valves

 RVC Drop Through Rotary Valves

RVC Drop-Through Rotary Valves are made of a tubular cast iron or stainless steel casing, a horizontally mounted rotor with a certain number of v shaped pockets. Two compartments at a time of the continuously turning rotor are filled up with material through the feeding cyclone inlet at the top of the Rotary Valve.

Drop Through RVC Valve

The RVC drop through rotary valve is the perfect valve for feeding pneumatic Cyclones and conveying systems, blow lines or conveyors.

  • Feed rates from 5 to 80 litres per revolution
  • Maximum differential pressure: 0.7 bar (11.6 PSI)
  • Available as ATEX version, Zone 22

Order code


Capacity (Ltr/rev)




RVC-5 170mm x 172mm 5 0.55 20 £ 1362
RVC-10 238mm x 135mm 10 0.55 20 £ 1526
RVC-15 276mm x 148mm 15 1.1 30 £ 1905
RVC-20 337mm x 196mm 20 1.5 30 £ 2537
RVC-35 470mm x 240mm 35 2.2 30 £ 3616
RVC-80 569mm x 284mm 80 3 30 £ 8989

Additional Options

  • Drive units – Bare shaft, mechanical speed variator, forced ventilated motor, standard motor with thermistor and chain drive
  • Drop through rotary valves available in 10, 20 or 30 RPM

  • RVC rotary valve with or without scrapers

  • Mechanical seals – High temperature resistant, purged seals, high temperature purged seals or standard
  • Body treatment – Standard, Chromium-plated, Teflon coated or Nickel coated
  • Rotor treatment – Standard, Teflon coated or Nickel coated
  • Available as ATEX version, Zone 22

RVC Rotary Valve Gallery

  •  RVC Drop Through Rotary Valves
  • RVC Rotary Valves
  • Drop Through Rotary Valve
Rotary Valves UK
Unit 17, Kingsditch Trading Estate
GL51 9PL
United Kingdom
Telephone: 01242 222913
Mobile: 07976 489990
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

2022© Rotary Valve Suppliers UK - Rowan Food & Biomass Engineering Ltd

Powered by Swanky Pixels